Re: [問題] 後變速器B螺絲的用途是啥啊...?

看板bicycle (單車腳踏車)作者LukeForward (Luke Forward)時間19年前 (2006/02/13 06:48)推噓0(0推 0噓 0→)

留言0則, 0人參與討論串1/1

※ 引述《chienjr (Rincon LXT)》之銘言： : 如精華區所述，調整時要調到剛剛好不會與飛輪磨到.... : 可是，shimano的是可以上下彈的，也是這樣調嗎？ : 調太開會有什麼影響啊？ : 變速會變笨嗎XD 太開的話變速會遲緩吧,哪天我自己試試定義 B-screw: A screw used to adjust the spring tension on the mounting pivot, which affects the distance between the cogs and the guide pulley 症狀 If the shift performance is poor in several outer cogs but good in all the inner cogs, it may indicate that the B-screw or chain length needs adjustment. 以上摘自Barnet's Manual chap. 32,這裡面提到太多B-screw了,可以自行翻閱另外不可以透過B-Screw調整鏈條張力,但這是適用Sram的後變,$himano的調整還是要看它本身的說明 Do not use the b-adjust screw to adjust the rear derailleur to act as a chaintensioning device or to prevent chain suck. This increases the chain gap causing poor shifting performance. 摘自Sram TECHNICAL MANUAL MTB COMPONENTS -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 220.131.1.35